|
Highlights:
- Mass, volume flow and temperature measurement of liquids and gases, density and concentration measurement of liquids
- Secure wireless access via Bluetooth®, even in safety-related applications
- Easily and quickly perform an insitu meter verification via Bluetooth
- With Entrained Gas Management (EGM™): Maintains operation over a wide range of gas volume fractions, even up to 100%, and complex flow conditions
- EGM is standard on every meter
- Production in Berverly, MA for certain meters for faster delivery
- Single straight tube design for dirty applications
- SIL 2/3
- 1/2" to 16" meter sizes
- Temps from -328 F to 752 F
|  |
For simple and cost-effective flow measurement of gases or liquids without auxiliary power
- Glass and metal tube purgemeters for low-flow applications <DN15 / ½" and process meters up to DN150 / 6"
- Optional switches, 4...20mA, HART®, FOUNDATION™ Fieldbus, Profibus-PA
- Globally approved for use in hazardous areas and suited for safety related SIL 2 applications
|  |
For all applications with conductive liquids
- From basic to demanding flow measurements, incl. custody transfer and safety-related applications (up to SIL 2/3)
- Designs and liner materials for virtually any application – from potable water to extremely adhesive, abrasive and aggressive liquids
- Large choice of nominal sizes up to DN3000 / 120"
|  |
For process and utility applications, energy and custody transfer (CT) measurements
- Comprehensive portfolio for gases, liquids and steam
- High temperature and cryogenic versions, variants for high pressure and higher viscosities
- Various designs: From clamp-on devices to multipath inline flowmeters
|  |
For utility applications, advanced energy management and Safety Instrumented Systems (SIS)
- Sophisticated flowmeters with integrated pressure and temperature compensation and integrated energy calculator for advanced energy measurement
- Certified for Safety Instrumented Systems (SIS)
- Cost-effective and robust devices for harsh process conditions and/or basic applications
|  |
Non-contact level measurement of liquids, pastes, granulates, powders and other solids
- Measuring distances up to 100 m / 328 ft
- Different antenna options, e.g. for corrosive or abrasive media, high pressure or temperature and applications with agitators
- Also suitable for hazardous areas, Functional Safety (SIL) or hygienic applications
|  |
Contact level measurement of liquids, solids or liquid-liquid interfaces
- Measuring distances up to 60 m / 196 ft
- Large choice of probes, e.g. for aggressive or abrasive media, high pressure or temperature and tanks with internals or boiling product surfaces
- Suitable for hazardous areas, Functional Safety (SIL) or hygienic applications
|  |
Point level detection of liquids and solids
- Insertion lengths up to 6 m / 19 ft (liquids) or 80 m / 262 ft (solids)
- Insensitive to changes of media properties, e.g. density, dielectric constant (εr) or electrical conductivity
- For high/low level detection, dry-run and overfill prevention even in highly critical applications (SIL) or hygienic environments
|  |
