M&C TechGroup


  • Gas sample probes
  • Sample conditioning systems
  • Refrigerant and Peltier chillers

M&C products and special systems provide excellent service and reliability; this is proven by our product quality and capability to provide customer specific solutions for over 30 different current industries and applications.
This is the reason why over 5,000 customers worldwide, from small, highly skilled engineering companies to well-known corporations, have confidence in our products again and again.

SP2400-H 230V Overview

Gas sample probe type SP2400-H. All gas bearing parts are made from Titanium. With external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0-180°C adjustable by an incorporated thermostat, over temperature limiter with reset key at +30°C Tsetting and low temperature alarm with potential free status-alarm contact at -30°C below Tsetting. Incl. weather protection shield with insulation. Power: 230V/50Hz,800W. mounting flange: DN65PN6B with thread G3/4″i. incl. flange sealing and screws. Material: Viton, ceramic, Titanium.

Application Areas: The SP2400-H sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes with a possible occurrence of corrosive condensate or with high concentrations of corrosive gas components.

Brochure Sheet

SP2200-H/C/I/BB 230V

Gas sample probe type SP2200-H/C/I/BB. With external ceramic filter type S-2K150, filter porosity: 2µm, with electrically heated external filter 0-180°C adjustable by an incorporated thermostat, over temperature limiter with reset key at +30°C Tsetting and low temp. alarm with potential free status-alarm contact at -30°C below Tsetting. With calibration-, isolation- and blowback valve. Incl. weather protection shield with insulation. Power: 230V/50Hz, 800W. mounting flange: DN65 PN6B with thread G3/4″i. Sample gas OUT: 1/4″NPTi. Material: SS316, ceramic, Viton.

Application Areas: The SP2200-H sample probes are used for continuous extraction of gases from high dust loaden, high temperature or humid processes. They can be backflushed with a closed sample gas outlet.

SP2000-H320/S 230V

Sample Probe type SP2000-H320/S. With external ceramic filter type S-2K150, filter porosity: 2µm, filter element seal and lid seal out of graphite. with electrically heated external filter 0-320°C adjustable by an incorporated thermostat, over temperature limiter with reset key at +30°C Tsetting and low temp. alarm with potential free status-alarm contact at -30°C below Tsetting. incl. weather protection shield with insulation. mounting flange: DN65PN6B with thread G3/4″i, incl. flange gasket and screws. Pre-separator out of glass/Hastelloy with peristaltic pump SR25.1, mounted on a mounting plate out of aluminium, material: SS316, ceramic, graphit, glass, PVDF, PTFE, Hastelloy. Calibration gas connection: 6 mm tube with plug, sample outlet: GL18-8 with PVDF connector for tube DN4/6. Power: 230V/50Hz, 800W.

Application Areas: M&C has developed a special sampling technique for continuous gas sampling of waste gas in DENOX plants (SCR) where NH3 is added to the flue gas in order to reduce the NOX content. This new sampling technique has also proved to be suitable for processes with very high pollutant concentrations. In these applications, a big problem is the measurement of NOX, SO2 and O2-concentrations. With temperatures of <300°C, ammonium salts are produced due to the chemical reaction of NH3 and the SO2/SO3 in the flue gas. This salification is blocking up filters and sample lines in a short time. The special M&C gas sample probe SP2000-H320/S represents a good solution for these problems.

HEX5-1.08 ZONE 2 240V EX

Regulated Ex-heater for sample probe typ Sp3200 for use in Ex-Zone 2 G/D and Class I DIV 2 Groups A,B,C,D.

SP3100V/EX, ZONE 1

For sampling from zones with explosive gas, with stainless steel filter element outside, optional: ceramic filter element, heating, back purging, sample tubes and pre-filter.